Wide selection of Hydraulic Hose Ends
All Types and Sizes
Hoses made while you wait right here in Central Mass (Clinton)
So many different hose fittings. No worries, we’re here to help!
Give us a call!
JIC (Joint Industry Counsel)
- JIC are available from 1/4″ to 1-1/4″ thread
- For both 2 wire and 4 wire hoses up to 1-1/4″
- The mating surfaces create the seal, no sealant needed
- Very common style, very reliable
- Female is swivel for easy installation
NPT (National Pipe Thread)
- Comes in straight, 90 (L, M, S) and 45
- Has swivel male (left most) and female (right most) hydraulic hose fitting
- Seal is made by meshing threads, requires sealant
- Available in 1/8″ through 1-1/4″ threads
- Fits hoses from 1/4″ through 1″
- 2 wire hose, not for 4 wire high pressure hose
Flat Face or Face seal
- O-ring seals on the flat surface of the female side of the hydraulic hose fitting
- Fits hoses from 1/4″ to 1-1/4″
- 2 Wire and 4 Wire
- Swivel Female for ease of installation
Metric Light & Heavy
- Metric light for low pressure & heavy for high pressure
- The difference between them is Metric Heavy the female stem is thicker with a thinner male thread
- The hoses are in standard inches sizes while the thread sizes are in MM
- O-ring and cone create the seal, no sealant required
British Standard Parallel Pipe (BSPP)
- British pipe is not tapered like NPT
- Sized like NPT 1/4″, 3/8″, 1/2″, 3/4″, 1″, 1-1/4, 1-1/2″
Japanese Industrial Standard (JIS)
- Similar to JIC but with 30° Flare
- Available in all hose sizes
- Male and female fittings
Society of Automotive Engineers (SAE)
- SAE are available from 1/4″ to 1-1/4″ thread
- SAE uses a 45° flare
Caterpillar Flange Fittings
- Cat hydraulic hose fittings are available in 3/4″ through 1-1/4″ 4 wire and 1-1/2″ 6 wire
- Straight, 22.5°, 30°, 45°, 60°, and 90° fittings
- 45° & 90° are available in regular and long drop
Code 61 & Code 62 Flange
- Both types of high pressure hydraulic hose fittings are available in 1/2″ through 1-1/2″